A newtype wrapper with a custom instance for Data.Vector.Unboxed, which packs booleans as efficient as possible (8 values per byte). Unboxed vectors of Bit use 8x less memory than unboxed vectors of Bool (which store one value per byte), but random writes are slightly slower.

Since: 0.1

Flip the bit at the given position. No bound checks are performed. Equivalent to flip unsafeModify complement, but up to 2x faster.

In general there is no reason to unsafeModify bit vectors: either you modify it with id (which is id altogether) or with complement (which is unsafeFlipBit).

>>> :set -XOverloadedLists
>>> Data.Vector.Unboxed.modify (`unsafeFlipBit` 2) [1,1,1,1]
[1,1,0,1]

Since: 1.0.0.0

Flip the bit at the given position. Equivalent to flip modify complement, but up to 2x faster.

In general there is no reason to modify bit vectors: either you modify it with id (which is id altogether) or with complement (which is flipBit).

>>> :set -XOverloadedLists
>>> Data.Vector.Unboxed.modify (`flipBit` 2) [1,1,1,1]
[1,1,0,1]

Since: 1.0.0.0

Cast an unboxed vector of words to an unboxed vector of bits. Cf. castFromWordsM.

>>> :set -XOverloadedLists
>>> castFromWords [123]
[1,1,0,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]

Since: 1.0.0.0

Try to cast an unboxed vector of bits to an unboxed vector of words. It succeeds if the vector of bits is aligned. Use cloneToWords otherwise. Cf. castToWordsM.

castToWords (castFromWords v) == Just v

Since: 1.0.0.0

Clone an unboxed vector of bits to a new unboxed vector of words. If the bits don't completely fill the words, the last word will be zero-padded. Cf. cloneToWordsM.

>>> :set -XOverloadedLists
>>> cloneToWords [1,1,0,1,1,1,1]
[123]

Since: 1.0.0.0

Cast an unboxed vector of Word8 to an unboxed vector of bits.

On big-endian architectures castFromWords8 resorts to copying instead of aliasing the underlying array.

>>> :set -XOverloadedLists
>>> castFromWords8 [123]
[1,1,0,1,1,1,1,0]

Since: 1.0.3.0

Try to cast an unboxed vector of bits to an unboxed vector of Word8. It succeeds if the vector of bits is aligned. Use cloneToWords8 otherwise.

castToWords8 (castFromWords8 v) == Just v

Since: 1.0.3.0

Clone an unboxed vector of bits to a new unboxed vector of Word8. If the bits don't completely fill the bytes, the last Word8 will be zero-padded.

>>> :set -XOverloadedLists
>>> cloneToWords8 [1,1,0,1,1,1,1]
[123]

Since: 1.0.3.0

Clone a ByteString to a new unboxed vector of bits.

>>> :set -XOverloadedStrings
>>> cloneFromByteString "abc"
[1,0,0,0,0,1,1,0,0,1,0,0,0,1,1,0,1,1,0,0,0,1,1,0]

Since: 1.1.0.0

Clone an unboxed vector of bits to a new ByteString. If the bits don't completely fill the bytes, the last character will be zero-padded.

>>> :set -XOverloadedLists
>>> cloneToByteString [1,0,0,0,0,1,1,0,0,1,0,0,0,1,1,0,1,1,0,0,0,1]
"ab#"

Since: 1.1.0.0

Zip two vectors with the given function. Similar to zipWith, but up to 3500x (!) faster.

Note: If one input is larger than the other, the remaining bits will be ignored.

For sufficiently dense sets, represented as bitmaps, zipBits is up to 64x faster than union, intersection, etc.

The function passed to zipBits may only use the following Bits methods:

.&., .|., xor, complement, zeroBits, and (likely uselessly) bitSizeMaybe and isSigned.

>>> :set -XOverloadedLists
>>> import Data.Bits
>>> zipBits (.&.) [1,1,0] [0,1,1] -- intersection
[0,1,0]
>>> zipBits (.|.) [1,1,0] [0,1,1] -- union
[1,1,1]
>>> zipBits (\x y -> x .&. complement y) [1,1,0] [0,1,1] -- difference
[1,0,0]
>>> zipBits xor [1,1,0] [0,1,1] -- symmetric difference
[1,0,1]

Since: 1.0.0.0

Map a vectors with the given function. Similar to map, but faster.

>>> :set -XOverloadedLists
>>> import Data.Bits
>>> mapBits complement [0,1,1]
[1,0,0]

Since: 1.1.0.0

Invert (flip) all bits.

>>> :set -XOverloadedLists
>>> invertBits [0,1,0,1,0]
[1,0,1,0,1]

Since: 1.0.1.0

Reverse the order of bits.

>>> :set -XOverloadedLists
>>> reverseBits [1,1,0,1,0]
[0,1,0,1,1]

Consider using the vector-rotcev package to reverse vectors in O(1) time.

Since: 1.0.1.0

Return the index of the first bit in the vector with the specified value, if any. Similar to elemIndex, but up to 64x faster.

>>> :set -XOverloadedLists
>>> bitIndex 1 [0,0,1,0,1]
Just 2
>>> bitIndex 1 [0,0,0,0,0]
Nothing

bitIndex bit == nthBitIndex bit 1

One can also use it to reduce a vector with disjunction or conjunction:

import Data.Maybe
isAnyBitSet   = isJust    . bitIndex 1
areAllBitsSet = isNothing . bitIndex 0

Since: 1.0.0.0

Return the index of the n-th bit in the vector with the specified value, if any. Here n is 1-based and the index is 0-based. Non-positive n results in an error.

>>> :set -XOverloadedLists
>>> nthBitIndex 1 2 [0,1,0,1,1,1,0] -- 2nd occurence of 1
Just 3
>>> nthBitIndex 1 5 [0,1,0,1,1,1,0] -- 5th occurence of 1
Nothing

One can use nthBitIndex to implement to implement select{0,1} queries for succinct dictionaries.

Since: 1.0.0.0

Return the number of set bits in a vector (population count, popcount).

>>> :set -XOverloadedLists
>>> countBits [1,1,0,1,0,1]
4

One can combine countBits with take to implement rank{0,1} queries for succinct dictionaries.

Since: 0.1

Return 0-based indices of set bits in a vector.

>>> :set -XOverloadedLists
>>> listBits [1,1,0,1,0,1]
[0,1,3,5]

Since: 0.1

For each set bit of the first argument, extract the corresponding bit of the second argument to the result. Similar to the parallel bit extract instruction (PEXT).

Note: If one input is larger than the other, the remaining bits will be ignored.

>>> :set -XOverloadedLists
>>> selectBits [0,1,0,1,1] [1,1,0,0,1]
[1,0,1]

Here is a reference (but slow) implementation:

import qualified Data.Vector.Unboxed as U
selectBits mask ws = U.map snd (U.filter (unBit . fst) (U.zip mask ws))

Since: 0.1

For each unset bit of the first argument, extract the corresponding bit of the second argument to the result.

Note: If one input is larger than the other, the remaining bits will be ignored.

>>> :set -XOverloadedLists
>>> excludeBits [0,1,0,1,1] [1,1,0,0,1]
[1,0]

Here is a reference (but slow) implementation:

import qualified Data.Vector.Unboxed as U
excludeBits mask ws = U.map snd (U.filter (not . unBit . fst) (U.zip mask ws))

Since: 0.1

Cast a vector of words to a vector of bits. Cf. castFromWords.

Since: 1.0.0.0

Try to cast a vector of bits to a vector of words. It succeeds if the vector of bits is aligned. Use cloneToWordsM otherwise. Cf. castToWords.

Since: 1.0.0.0

Clone a vector of bits to a new unboxed vector of words. If the bits don't completely fill the words, the last word will be zero-padded. Cf. cloneToWords.

Since: 1.0.0.0

Zip two vectors with the given function, rewriting the contents of the second argument. Cf. zipBits.

Note: If one input is larger than the other, the remaining bits will be ignored.

>>> :set -XOverloadedLists
>>> import Data.Bits
>>> Data.Vector.Unboxed.modify (zipInPlace (.&.) [1,1,0]) [0,1,1]
[0,1,0]

Warning: if the immutable vector is shorter than the mutable one, it is the caller's responsibility to trim the result:

>>> :set -XOverloadedLists
>>> import Data.Bits
>>> Data.Vector.Unboxed.modify (zipInPlace (.&.) [1,1,0]) [0,1,1,1,1,1]
[0,1,0,1,1,1] -- note trailing garbage

Since: 1.0.0.0

Apply a function to a mutable vector bitwise, rewriting its contents. Cf. mapBits.

>>> :set -XOverloadedLists
>>> import Data.Bits
>>> Data.Vector.Unboxed.modify (mapInPlace complement) [0,1,1]
[1,0,0]

Since: 1.1.0.0

Invert (flip) all bits in-place.

>>> :set -XOverloadedLists
>>> Data.Vector.Unboxed.modify invertInPlace [0,1,0,1,0]
[1,0,1,0,1]

Since: 0.1

Reverse the order of bits in-place.

>>> :set -XOverloadedLists
>>> Data.Vector.Unboxed.modify reverseInPlace [1,1,0,1,0]
[0,1,0,1,1]

Consider using the vector-rotcev package to reverse vectors in O(1) time.

Since: 0.1

Same as selectBits, but extract selected bits in-place. Returns the number of selected bits. It is the caller's responsibility to trim the result to this number.

Note: If one input is larger than the other, the remaining bits will be ignored.

>>> :set -XOverloadedLists
>>> import Control.Monad.ST (runST)
>>> import qualified Data.Vector.Unboxed as U
>>> runST $ do { vec <- U.unsafeThaw [1,1,0,0,1]; n <- selectBitsInPlace [0,1,0,1,1] vec; U.take n <$> U.unsafeFreeze vec }
[1,0,1]

Since: 0.1

Same as excludeBits, but extract excluded bits in-place. Returns the number of excluded bits. It is the caller's responsibility to trim the result to this number.

Note: If one input is larger than the other, the remaining bits will be ignored.

>>> :set -XOverloadedLists
>>> import Control.Monad.ST (runST)
>>> import qualified Data.Vector.Unboxed as U
>>> runST $ do { vec <- U.unsafeThaw [1,1,0,0,1]; n <- excludeBitsInPlace [0,1,0,1,1] vec; U.take n <$> U.unsafeFreeze vec }
[1,0]

Since: 0.1

Binary polynomials of one variable, backed by an unboxed Vector Bit.

Polynomials are stored normalized, without leading zero coefficients.

The Ord instance does not make much sense mathematically, it is defined only for the sake of Set, Map, etc.

>>> :set -XBinaryLiterals
>>> -- (1 + x) * (1 + x + x^2) = 1 + x^3 (mod 2)
>>> 0b11 * 0b111 :: F2Poly
0b1001

Since: 1.0.1.0

Convert an F2Poly to a vector of coefficients (first element corresponds to a constant term).

>>> :set -XBinaryLiterals
>>> unF2Poly 0b1101
[1,0,1,1]

Since: 1.0.1.0

Make an F2Poly from a list of coefficients (first element corresponds to a constant term).

>>> :set -XOverloadedLists
>>> toF2Poly [1,0,1,1,0,0]
0b1101

Since: 1.0.1.0

Execute the extended Euclidean algorithm. For polynomials a and b, compute their unique greatest common divisor g and the unique coefficient polynomial s satisfying \( a \cdot s + b \cdot t = g \).

>>> :set -XBinaryLiterals
>>> gcdExt 0b101 0b0101
(0b101,0b0)
>>> gcdExt 0b11 0b111
(0b1,0b10)

Since: 1.0.2.0